PARTRIDGE
ELECTRONICS
54-56 Fleet Road, Benfleet, Essex. SS7 5JN
 
SECTION 4 C
 
CLICK ABOVE TO SELECT SITE SECTION     Have a browse around the sections
 
INDEX PAGE            ENQUIRY FORM            ORDER FORM            GENERAL INFO
Bn 4-7
STUDIO ACCESSORIES AND EQUIPMENT
FOOT SWITCH OPERATED REMOTE CONTROLLER
Hard wired   Cable connected
For use with players fitted with PS/2 socket
Supplied in ABS enclosure complete with Foot switch
 Foot switch fitted with 2M lead & jack plug
1M  PS/2 Lead. &   3m Mains cable with 13A plug
wired for F5 START or F4 STOP   (please specify)   
                          Order code 20C-0902         Price:- £154-00
Micro processor control units for use
with Sony & other Mini -disk players
fitted with PS/2 sockets
model also available for HHB MDP500
 
Dual Foot Switch
Full A / B - Y Switching
LED's indicate switching
Switch between 2 sorces
Order code 20C-8373
Price:- £39-90
 
PX55 ZERO SWITCHING MAINS REMOTE CONTROL UNIT
Max. load:-1.5 A at 240V
Terminal blocks mounted on PCB
Requires 24v DC will work on 18-30V DC
Model PX55 Opto-coupled zero switching
Mains ON / OFF control device.
For remotely controlling equipment
and other mains powered devices.
Order code 20C-200 Board ONLY £31-00
Order code 20C-210 Board installed in ABS enclosure £34-00
 
TIMER ZERO SWITCHING MAINS REMOTE CONTROL UNIT
Max. load:-1.5 A at 240V
Connections Terminal blocks mounted on PCB
Requires 24v DC will work on 18-30V DC
PX55T Opto-coupled zero switching Mains
ON / OFF control device. Fitted with an
electronic variable on board adjustable hold on
timer 10sec. - 2min. For remotely controlling
equipment and other mains powered devices.
Order code 20C-250 Board ONLY £42-00
Order code 20C-260 Board inserted in ABS enclosure £46-00
 
PX56 SINGLE PULSE CHANGE OVER REMOTE CONTROL UNIT
Max. load:-500mA @ 100V
Connections Terminal blocks mounted on PCB
Pulse duration 1. 5 sec. aprox.
Provides totally isolated control contacts
Requires 24v DC will work on 18-30V DC
Model PX56 is ideal for remote control of logic
controlled audio devices.  Feeding a DC voltage
to input causes relay to switch the double pole
change over relay contacts momentarily.
Order code 20C-203 Board ONLY £19-00
Order code 20C-213 Board inserted in ABS enclosure £23-00
 
PX57 DOUBLE PULSE CHANGE OVER REMOTE CONTROL UNIT
Max. load:-500mA @ 100V
Connections Terminal blocks mounted on PCB
Pulse duration 1. 5 sec. aprox.
Provides totally isolated control contacts
Requires 24v DC will work on 18-30V DC
Model PX57 is ideal for remote control of logic
controlled audio devices.  Feeding DC voltage to
input causes relay to switch double pole change
over relay contacts momentarily. Removal of
DC voltage causes relay to repeat this action.
Order code 20C-206 Board ONLY £26-00
Order code 20C-216 Board inserted in ABS enclosure £29-00
 
PX60 CONTINUOUS CHANGE OVER REMOTE CONTROL UNIT
Max. load:-500mA @ 100V
Connections Terminal blocks mounted on PCB
Provides totally isolated control contacts
Requires 24v DC will work on 18-30V DC
Model PX60 is ideal for remote control of
logic controlled audio devices.  Feeding DC
voltage to input causes relay to switch double
pole change over relay contacts they remain
switched until control voltage is removed.
Order code 20C-209 Board ONLY £19-00
Order code 20C-219 Board inserted in ABS enclosure £23-00
 
SOUND ACTIVATED AUTOMATIC CHANGE-OVER SWITCH
Unit may be used to automatically switch from Studio output to Sustaining Service
Avoids dead Air time in unmanned studio's
Switiches automatically after adjustable pre-selectable length of time
Adjustable Signal switching level
Input Impedance:- 10K
Output :-to feed 10K or greater
Maximum input level + 10dB
Unit fitted with a second spare DP / CO Relay. For switching auxilary equipment
Max.switching 50Volt x 100ma
Above Controller supplied in ABS enclosure Size:- 200 x 250 x 65 mm
with integral Mains power supply
 
Connections:- Audio In's and Out Standard 1/4" jack
Mains:- 2M Cable fitted with 13Amp plug
 
  Standard Mono Model Order code:-23C-ROS1                                        Price:-  £142-00
  Standard Stereo Model Order code:-23C-ROS2                                        Price:-  £172-00
 
    XLR Mono Model Order code:-23C-ROS3                                                        Price:-  £174-00
     XLR Stereo Model Order code:-23C-ROS4                                                        Price:-  £218-00
 
FADE IN FADE OUT SOUND ACTIVATED AUTOMATIC
CHANGE-OVER UNIT
Unit may be used to automatically switch from Studio output to Sustaining Service
Avoids dead Air time in unmanned studio's
FAde OUT / IN adjustable pre-selectable length of time. 15 - 30 Seconds
Dead Air time before fading adjustable. 10-30 Seconds
Adjustable Signal switching level
Input Impedance:- 10K
Output :-600R
Maximum input level + 10dB
Unit fitted with a second spare DP / CO Relay. For switching auxilary equipment
Max.switching 50Volt x 100ma
Above Controller supplied in ABS enclosure Size:- 200 x 250 x 65 mm
with integral Mains power supply
Connections:- Audio In's and Out Standard 1/4" jack
Mains:- 2M Cable fitted with 13Amp plug
 
  Standard Mono Model Order code:-23C-ROF1                                              Price:-  £230-00
Standard  Stereo Model Order code:-23C-ROF2                                                    Price:-  £265-00
  XLR   Mono Model Order code:-23C-ROF3                                              Price:-  £270-00
     XLR Stereo Model Order code:-23C-ROF4                                                   Price:-  £312-00
 

MUSIC ON HOLD SYSTEMS

For use with switch board systems provides safe economical way of providing music on hold
.Requires -10 to +10dB input for -13dB signal level to telecom line to meet regulations.
Line feed zenner protected, fully balanced floating and transformer D.C. isolated.
Telecom line and audio input via integral terminal block. Supplied in insulated enclosure.
On board jumper plug to suit various site requirements. Unit requires no external supply voltage.
FOR SWITCH BOARD SYSTEM
Order code--23C-MOHSB
£136
 
For single line system use provides a safe economical way of providing music on hold.
Requires -10 to +10dB signal input to provide -13dB signal level to telecom line meets regulations.
Zenner protected fully balanced floating D.C. isolated. Unit fitted with line isolation transformer.
Standard B.T. socket fitted on side of case for plugging in your telephone instrument.
Switch on side of enclosure allows music on hold facility or selection of a telephone instrument.
This unit requires no external supply voltage. Telecom line connection via 2m. cable fitted with
standard B.T. type plug. Audio input standard 1/4" jack socket.
FOR NON SWITCHBOARD SYSTEMS
Order code--23C-MOHNB
£186
 
For twin line systems incorporates amplifier to enhance and amplify the music signal plus control,
-13dB level to telecom line. Two transformer protected fully ballanced floating and D.C.
isolated interfaces to line (fitted on board jumper to select D.C. path or non pathhold circuit.
Fitted with on board level pre-set. Supplied with telecom safety barrier and mains power supply.
Installed in insulated enclosure size:-W 250 x D 200 x H 70mm.
FOR NON TWIN LINE DRIVE SYSTEM
Order code--23C-MOHLD
£234

Have you visited our other sections

INDEX PAGE            ENQUIRY FORM           ORDER FORM           GENERAL INFO

Copyright © 2007 Partridge Electronics